FLOORING
APPLICATION
Flooring performance depends on more than the selected system. Substrate condition, preparation, placement, leveling, finishing and final surface treatment determine how the floor performs in use. RAM ARBIA delivers coordinated flooring application for industrial, commercial and specialized environments.
The floor system
is only the beginning.
A high-performance flooring system can only achieve its intended result when preparation and application are properly controlled. Levels, joints, surface condition, finishing and curing all influence the final floor.
RAM ARBIA combines flooring materials with controlled field application, providing an integrated approach from substrate preparation and concrete placement through finishing, coating, renovation and final inspection.
Performance is created
during application.
The quality of a finished floor is influenced by every stage of execution. Surface preparation, placement, leveling, finishing and protection must work together to support the intended use.
Existing conditions reviewed and prepared before the flooring system is applied.
Floor elevations and surface consistency controlled throughout installation.
Finishing activities coordinated around the required surface performance.
Application considered around traffic, operations and long-term use.
Surface characteristics considered around movement and operational requirements.
Finished flooring developed to support practical cleaning and maintenance.
From substrate
to finished floor.
Flooring application is a sequence of controlled activities. Each stage influences the quality and performance of the completed surface.
Substrate Assessment
Existing surface and floor conditions reviewed before application begins.
Surface Preparation
Floor preparation coordinated to create suitable conditions for the selected system.
Concrete Placement
Concrete flooring installed according to project and operational requirements.
Leveling & Screeding
Surface levels controlled to achieve required floor geometry and consistency.
Trowel Finishing
Concrete surfaces mechanically or manually finished around the required floor condition.
Surface Treatments
Finishing systems and protective treatments applied according to floor requirements.
Coating Application
Resin and coating systems applied over prepared floors where specified.
Inspection & Handover
Finished flooring reviewed before completion and operational use.
Every surface starts
below the finish.
The visible finish is only the final layer of the flooring system. Performance depends on preparation, support, slab construction and final surface treatment working together.
Different floors.
Different finishing strategies.
The flooring application method should respond to the operational requirements, substrate condition and intended surface performance of each project.
Precision matters
across the entire slab.
In warehouses and industrial environments, surface consistency can affect material handling, equipment movement and operational efficiency. Floor application must therefore control both the finish and the geometry of the slab.
Existing floors can
perform again.
Flooring application is not limited to new construction. Existing floors can require repair, preparation and new surface treatments due to wear, damage or changing operational requirements.
One application approach
does not fit every floor.
Floor requirements change according to traffic, load, equipment, use, cleaning requirements and the surrounding environment.
Industrial Flooring
Warehouse Flooring
Commercial Flooring
Residential Flooring
Basement Flooring
Garages & Parking Areas
Quality must be controlled
while the floor is being built.
Many flooring problems originate during preparation or installation. Quality control throughout application helps protect the finished floor and its intended performance.
From floor condition
to finished surface.
Flooring application develops through controlled stages so the finished system can respond to its intended environment and use.
Assess
Review use, floor condition and performance requirements.
Prepare
Prepare the substrate for the selected flooring system.
Place
Execute concrete or flooring material placement.
Level
Control elevation, flatness and surface geometry.
Finish
Apply the specified finish or surface treatment.
Verify
Review the completed floor before final handover.
Built around
floor performance.
Successful flooring application balances substrate preparation, operational loading, surface quality, safety and maintainability.
